Knowledge

Home > Exhibition > Content

Manufacture intensive pist

Eternal Top Industrial Limited | Updated: Dec 05, 2016

1, the standard section after Assembly, overall dimension (length, width and height) of limit deviations for 1mm.

2, the standard section after Assembly, side panels and back seam gap in less than 1mm.

3, the track after installation, the parallel degree deviation is less than 1mm/m, length is not more than 1mm; deviation of parallelism on the same cross section is not more than 1mm/m, length is not more than 1mm.

4, two tracks in parallel degree deviation is less than 1mm; guide docking at the height difference is not more than 0.3mm.